Scan Subsets (Combined Scanning) - Canon imagePRESS C800 Series Operation Manual

Scan subsets (combined scanning)

Scan subsets (combined scanning)
You can combine different subsets of originals into a scan file. With the optional [Page
programming] function you can define the layout and finishing of each subset.
For more information, see:
About scan jobs on page 57
Scan job settings on page 240
Use page programming on page 107
Before you begin
Read the instructions detailing how to use the automatic document feeder and the glass plate.
Use the automatic document feeder to copy or scan on page 59
(See
copy or scan on page
Procedure
1. Touch [Jobs] -> [Copy/Scan].
2.
Select one the available scan templates.
3.
Press [Subset].
4.
Place the first subset into the automatic document feeder or on the glass plate.
5.
Define the settings for the subset and the scan file.
6. Press [Scan].
7.
Place the next subset into the automatic document feeder or on the glass plate.
8. Define the settings for the subset and the scan file.
9.
Press [Scan].
10. Repeat steps 7, 8, and 9 for each subset.
11.
Touch [Ready] when the last subset is scanned.
12.
Use the optional [Page programming] function to define the layout and finishing of the subsets.
13. Touch [Ready] to close the [Page programming] function.
14.
Define the destination for the scan file, enter the job name and the file name ID for the scan file.
15. Touch the start button
68 Chapter 3 - Prepare the jobs
61)
to start the scan job.
Use the glass plate to
or
imagePRESS C800 Series