Correct The Color Tones With The Acct Function - Canon imagePRESS C800 Series Operation Manual

Correct the color tones with the ACCT function

To correct slight color deviations in the color tones you can activate the automatic correction
color tone (ACCT) function. The ACCT function uses the values of the color tones that are stored
during the registration procedure.
(See )
NOTE
Only activate the ACCT function when you have noticed slight color deviations in the color tones
during some time. When the color tones deviate again, you can repeat this procedure.
Before you begin
Make sure the print system is calibrated and in optimal condition.
Procedure
1.
Touch [System] -> [Color adjustment].
2. Touch [Auto Correct Color Tone] -> [Perform correction].
3.
Select the slot with the values of the previously registered color tones.
4. Touch [OK].
5.
Select the media.
6.
Touch [OK].
7.
Follow the instructions on the control panel.
After you finish
When the ACCT function is no longer required, for example when parts are replaced, you can
deactivate the ACCT function again with the [Reset] button.
imagePRESS C800 Series
Register the color tones for the ACCT function on page 172
Correct the color tones with the ACCT function
Chapter 6 - Keep the image quality high 173