Copy Subsets (Combined Copying) - Canon imagePRESS C800 Series Operation Manual

Copy subsets (combined copying)

You can combine different subsets of originals into a copy. With the optional [Page
programming] function you can define the layout and finishing of each subset.
For more information, see:
About copy jobs on page 55
Copy job settings on page 236
Use page programming on page 107
Before you begin
Read the instructions detailing how to use the automatic document feeder and the glass plate.
Use the automatic document feeder to copy or scan on page 59
(See
copy or scan on page
Procedure
1. Touch [Jobs] -> [Copy/Scan] -> [Combined copy job].
2.
Place the first subset into the automatic document feeder or on the glass plate.
3.
Define the settings for the subset and the copy.
4.
Press [Scan].
5.
Place the next subset into the automatic document feeder or on the glass plate.
6. Define the settings for the subset and the copy.
7.
Press [Scan].
8. Repeat step 5, 6, and 7 for each following subset.
9.
Touch [Ready] when the last subset is scanned.
10. Use the optional [Page programming] function to define the layout and finishing of the subsets.
11.
Touch [Ready] to close the [Page programming] function.
12.
Define the destination and enter a name for the copy.
13. Touch the start button
imagePRESS C800 Series
61)
to start the copy job.
Copy subsets (combined copying)
Use the glass plate to
or
Chapter 3 - Prepare the jobs 67