Enable Remote Service - Canon imagePRESS C800 Series Operation Manual

Enable Remote Service

Remote Service is a web-based application that runs on the print system or on a separate server
in the network. You need the Settings Editor to configure Remote Service. (See
configuration and maintenance on page
Remote Service has the following functionality:
• Remote Diagnostics, to communicate system information for analysis and troubleshooting.
• Remote Meter Reading, to send counter information for billing purposes.
• Remote Assistance, to remotely provide assistance in case of problems.
Procedure
1.
Touch [System] -> [Setup].
2.
Press [Local key operator settings].
3.
Enter your key operator PIN.
4.
Touch [Connectivity] to check the connectivity settings.
5. Touch [Remote connection enabled] -> [Yes].
6.
Touch [Test] to test the connection.
NOTE
The dashboard shows the status of the connection when Remote Service is active.
7.
Close the menu.
imagePRESS C800 Series
182)
Chapter 7 - Maintain the print system
Enable Remote Service
System
225