Replace The Waste Toner Container - Canon imagePRESS C800 Series Operation Manual

Replace the waste toner container

Replace the waste toner container
The dashboard of the control panel indicates if the waste toner container needs replacing. You
can replace the waste toner container at a later time, but be aware that the active job or one of
the next jobs will cause an error because of the full waste toner container. You can find the waste
toner container in the print module.
[106] Location of the waste toner container
WARNING
• Do not store toner cartridges in places that are exposed to open flames. This can cause toner
ignition, which may result in burns or a fire.
• If toner gets onto your hands or clothing, immediately wash it off with cold water. Warm
water will set the toner. If this happens, it becomes impossible to remove the toner.
CAUTION
• If toner is ingested, consult a physician immediately.
IMPORTANT
• For information about Canon waste toner containers, see
• Your local authorized Canon dealer will dispose of used waste toner containers.
• You cannot reuse toner. Do not mix new and used toner together.
• Only use waste toner containers intended for your print system.
• Do not replace the waste toner container before a message on the control panel appears to
inform you that you must replace the container.
• When you insert the waste toner container, push the container as far as possible.
NOTE
When you replace the waste toner container during a print job, the print process will resume
after the waste toner container is replaced.
For more information, see:
Access the print module parts on page 228
Check the filling levels of the waste toner container on page 129
System monitoring on page 120
196 Chapter 7 - Maintain the print system
Consumables on page
185.
imagePRESS C800 Series