Remove In The Standard Stacker / Stapler The Punch Waste - Canon imagePRESS C800 Series Operation Manual

Hide thumbs Also See for imagePRESS C800 Series:
Table of Contents

Advertisement

Remove in the standard stacker / stapler the punch waste

The dashboard of the control panel indicates if the punch waste tray is full. The print system
cannot punch when the punch waste tray is full. This instruction only describes the removal of
punch waste of the stacker/stapler. Refer to the user manual of the professional puncher how to
remove punch waste from the professional puncher.
[119] Location of the punch waste tray
IMPORTANT
Be careful when you perform maintenance tasks on optionals attached to the machine. When
you perform a maintenance task, such as replace a staple cartridge, remove waste, or solve
jams, other machine parts can continue with job process activities.
For more information, see:
Standard stacker / stapler on page 45
System monitoring on page 120
Procedure
Action
1
Open the front cover of the punch unit (1) and
pull out the punch waste tray (2).
2
Discard the punch waste.
3
Return the punch waste tray back to its original
position (1) and close the front cover of the
punch unit (2).
imagePRESS C800 Series
IMPORTANT
Make sure that the punch waste tray
is completely emptied.
CAUTION
When you close the front cover of
the punch unit, be careful not to get
your fingers caught. This can cause
personal injury.
Remove in the standard stacker / stapler the punch waste
Chapter 7 - Maintain the print system
213

Advertisement

Table of Contents
loading

Table of Contents