Canon imagePRESS C800 Series Operation Manual page 140

Hide thumbs Also See for imagePRESS C800 Series:
Table of Contents

Advertisement

Load media into the paper module
Action
9
Continue to load the next media stacks of ap-
proximately 10 mm / 0.4" (1) and lower the
feeding support roller (2) when ready.
10
Gently close the paper tray and make sure it
clicks into place.
After you finish
• When a paper jam occurs or you notice poor image quality, turn over the media stack and
reload the media stack. Do not reload textured, single-sided coated, or already printed paper to
avoid a paper jam. For these media, take a new stack.
• Tightly rewrap the remaining media in the original package, and store the package in a dry
place, away from direct sunlight or high temperatures.
140
Chapter 5 - Print the jobs
IMPORTANT
• Make sure the loaded media stack
does not exceed the loading limit
mark (
).
• Make sure the loaded envelope
stack does not exceed the enve-
lope loading limit mark (
a maximum of approximately 30
envelopes. Use the correct orien-
tation for the envelopes. (See
Feed instruction for envelopes on
page
261)
CAUTION
When you close the paper tray, be
careful not to get your fingers
caught. This can cause personal in‐
jury.
). Load
imagePRESS C800 Series

Advertisement

Table of Contents
loading

Table of Contents