Remove Printed Output From The Stacker/Stapler - Canon imagePRESS C800 Series Operation Manual

Remove printed output from the stacker/stapler

The output tray moves downwards during the print process to give space to the growing stack of
output.
The workflow profile determines to which output trays PRISMAsync printed output is sent. When
an output tray has reached its limit, the printed output automatically goes to the next available
tray. If all available output trays have reached their stacking limits, the printing process stops.
Remove all printed output from the output trays. The output trays move upwards, and print
process resumes.
Use the Settings Editor to turn high-volume stacking for the professional stacker / stapler on or
Settings Editor settings and information on page 295
off.
For more information, see:
Professional stacker / stapler on page 43
Standard stacker / stapler on page 45
CAUTION
• Do not place your fingers in the stacker stapler when it is in use. This can cause personal
injury or stacker / stapler damage.
• When you remove paper from the output tray, do not place your hands in the output tray of
the stacker/stapler. The output tray can move upwards and your hands may get caught.
• Do not place your hands in the part of the output tray near the rollers where stapling takes
place. This can cause personal injury.
imagePRESS C800 Series
Remove printed output from the stacker/stapler
(See )
Chapter 5 - Print the jobs 155