Canon imagePRESS C800 Series Operation Manual page 208

Replace in the standard stacker /stapler the staple cartridge in the saddle-stitch unit
Procedure
Action
1 Open the front cover of the stacker/stapler.
2 Pull out the saddle-stitch unit until it stops (1).
Pull out and push up the staple unit (2).
3 Remove the empty staple cartridges (1) and
click the new staple cartridges into its place (2).
4 Pull the staple unit towards you and push
down the staple unit in its original position (1).
Push the saddle-stitch unit in its original posi-
tion (2).
5 Close the front cover.
208 Chapter 7 - Maintain the print system
NOTE
Replace both staple cartridges. You
can only insert one staple cartridge
at a time.
CAUTION
When you push the saddle-stitch
unit to its original position, be care‐
ful not to get your fingers caught.
This can cause personal injury.
CAUTION
When you close the front cover of the stacker/stapler, be careful not to get
your fingers caught. This can cause personal injury.
*1 Saddle-stitch unit
*2 Staple unit
*2
*1
imagePRESS C800 Series