Telex IP-223 to RTS Intercom System Application Note page 25

To configure PTT with VOX for a remote tone control system, do the following:
1. Click Per Line Setup.
1. In the LAM Level dB field, enter the level in dB.
2. In the LAM Time field, enter three (3) seconds.
3. Click Submit.
4. Click Save to EEPROM.
5. Click Save Parameters.
NOTE:
FIGURE 18. Per Line Setup Window, Local Mode– Line 2
AN-DISPATCH-035
The Per Line Setup window appears.
The Per Line Setup configurations are temporarily saved.
The EEPROM window appears.
All configurations are permanently saved to the IP-223 console.
The recommended LAM level is -20dB to -25dB.
IP-223 to RTS Intercom Products
25