Table of Contents
Advertisement
End by
Click on NEXT to proceed to the next page (step 2) Broadband Type.
Step 2) WAN Type
In this section you have to select one of four types of connections that you will be using to
connect your broadband router's WAN port to your ISP (see screen below).
Note: Different ISP's require different methods of connecting to the Internet, please check with
your ISP as to the type of connection it requires.
Menu
1.1 Cable Modem
1.2 Fixed-IP xDSL
1.3 PPPoE
1.4 PPTP
Select the period in which you wish to end daylight
Savings Time
Description
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
17
Advertisement
Table of Contents
