Selecting Vpn Client Types - Cisco 515E - PIX Restricted Bundle Getting Started Manual

Implementing the IPsec Remote-Access VPN Scenario

Selecting VPN Client Types

Step 1
Step 2
PIX 515E Security Appliance Getting Started Guide
3-6
In Step 2 of the VPN Wizard, perform the following steps:
Specify the type of VPN client that will enable remote users to connect to this
security appliance. For this scenario, click the Cisco VPN Client radio button.
You can also use any other Cisco Easy VPN remote product.
Click Next to continue.
Chapter 3 Scenario: IPsec Remote-Access VPN Configuration
78-17645-01