Table of Contents
Advertisement
11.1 Overview
Dynamic Domain Name Service (DDNS) services let you use a fixed domain name with a dynamic
IP address. Users can always use the same domain name instead of a different dynamic IP address
that changes each time to connect to the NBG-418N v2 or a server in your network.
Note: The NBG-418N v2 must have a public global IP address and you should have your
registered DDNS account information on hand.
11.2 Dynamic DNS Screen
To configure your NBG-418N v2's DDNS, click Network > DDNS.
Figure 77 Network > DDNS
The following table describes the labels in this screen.
Table 46 Network > DDNS
LABEL
Enable
Dynamic DNS
Service
Provider
Host Name
User Name
Password
Timeout
DESCRIPTION
Click the Enable Dynamic DNS check box to enable DDNS.
Select the name of your DDNS Service provider from the drop-down list.
The Host name is the domain name that the DDNS service will map to your dynamic global
IP address. Type the host name fully qualified, for example, 'yourhost.mydomain.net'. You
can specify up to two host names in the field separated by a comma (",").
Type the User name that you used when you registered with the DDNS service.
Type the Password associated with the DDNS user name.
This is the length of Time in hours between updates to the DDNS service. If the update
fails, the NBG-418N v2 will disable DDNS.
NBG-418N v2 User's Guide
109
C
HAPTER
Dynamic DNS
11
Advertisement
Table of Contents
