Installing The Camshaft And Rocker Arms - Yamaha BT1100 2002 Service Manual

ROCKER ARMS AND CAMSHAFTS
EAS00220
INSTALLING THE CAMSHAFT AND ROCKER
ARMS
1. Lubricate:
• camshaft
2. Install:
• camshaft 1
• camshaft bushing 2
NOTE:
• The dowel pin a on the end of the camshaft
must align with the timing mark b on the cylin-
der head.
• Make sure that the N
in the rear cylinder head and the N
4 is installed in the front cylinder head.
3. Install:
• stopper plate 1
4. Lubricate:
• rocker arm shafts
4-19
ENG
Recommended lubricant
Camshaft/Bushing
Molybdenum disulfide oil
.1 camshaft 3 is installed
o
Stopper plate bolt 2
20 Nm (2.0 m•kg)
Recommended lubricant
Engine oil
o .2 camshaft