Chassis; Adjusting The Front Brake - Yamaha BT1100 2002 Service Manual

a

ADJUSTING THE FRONT BRAKE

2
1
EB304001

CHASSIS

ADJUSTING THE FRONT BRAKE
1. Adjust:
• brake lever position
(distance a between the brake lever and
the handlebar grip)
a. Turn the adjusting dial 1 while holding the
lever pushed away from the handlebar grip
NOTE:
Align the setting on the adjusting dial with the
arrow mark 2
Position n. 1
Position n. 4
WARNING
After adjusting the brake lever position, make
sure the pin on the brake lever holder is firm-
ly inserted in the hole in the adjusting dial.
WARNING
A soft or spongy feeling in the brake lever can
indicate the presence of air in the brake sys-
tem. Before the vehicle is operated, the air
must be removed by bleeding the brake sys-
tem. Air in the brake system will considerably
reduce braking performance and could result
in loss of control and possibly an accident.
Therefore, inspect and, if necessary, bleed the
brake system. After adjusting the brake lever
free play, make sure that there is no brake
drag.
3-21
INSP
ADJ
Maximum a a
distance
Minimum a a
distance