Special Tools - Yamaha BT1100 2002 Service Manual

EB102001

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only the
appropriate special tools; this will help prevent damage caused by the use of inappropriate tools or
improvised techniques. Special tools may differ by shape and part number from country to country. In
such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Slide hammer bolt/weight
Weight
90890-01084
Bolt
These tools are used to remove the rocker
90890-01085
arm shaft.
Crankcase separating tool
90890-01135
This tool is used to remove the crankshaft.
Coupling gear/middle shaft tool
90890-01229
This tool is needed when removing or
installing the final pinion shaft nut.
Final gear backlash band
Final gear
backlash band
90890-01230
Middle gear
backlash band
This tool is needed when measuring final
90890-01231
gear/middle gear backlash.
Crankshaft installer pot/bolt/adapter/spacer
Installer pot
90890-01274
Bolt
90890-01275
Adapter
90890-04130
Spacer
90890-04060
These tools are used to install the crankshaft.
Piston pin puller
90890-01304
This tool is used to remove the piston pin.
Fuel level gauge
90890-01312
This gauge is used to measure the fuel level
in the float chamber.
Tool name/How to use
1-5
GEN
INFO
SPECIAL TOOLS
Illustration