Changing The Engine Oil - Yamaha BT1100 2002 Service Manual

1

CHANGING THE ENGINE OIL

4 4 2
3
3-16
EASB0005
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• engine oil filler cap 1
• O-ring
• engine oil drain bolt 2
• gasket
4. Drain:
• engine oil
(completely from the crankcase)
5. If the oil filter element is also to be replaced,
perform the following procedure.
WARNING
Oil filter element replacement should be made
at room temperature.
a. Remove the oil filter element cover plate 1,
element cover 2 and oil filter element 3.
b. Check the O-ring 4 and replace it if it is
cracked or damaged.
c. Install the new oil filter element and the ele-
ment cover.
Oil filter element cover bolt
10 Nm (1.0 m•kg)
6. Check:
• engine oil drain bolt gasket
Damage Replace.
7. Install:
• gasket
• engine oil drain bolt
8. Fill:
• crankcase
(with the specified amount of the recom-
mended engine oil)
INSP
ADJ
43 Nm (4.3 m•kg)