Checking The Brake Fluid Level - Yamaha BT1100 2002 Service Manual

A
B
a

CHECKING THE BRAKE FLUID LEVEL

EAS00115
CHECKING THE BRAKE FLUID LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
• Place the motorcycle on a suitable stand.
• Make sure that the motorcycle is upright.
2. Check:
[A] Front brake
[B] Rear brake
a
• Use only the designated brake fluid. Other
brake fluids may cause the rubber seals to
deteriorate, causing leakage and poor brake
performance.
• Refill with the same type of brake fluid that
is already in the system. Mixing brake fluids
may result in a harmful chemical reaction,
leading to poor brake performance.
• When refilling, be careful that water does
not enter the reservoir. Water will signifi-
cantly lower the boiling point of the brake
fluid and could cause vapor lock.
CAUTION:
Brake fluid may damage painted surfaces and
plastic parts. Therefore, always clean up any
spilt brake fluid immediately.
NOTE:
In order to ensure a correct reading of the brake
fluid level, make sure that the top of the reservoir
is horizontal.
3-23
• brake fluid level
Below the minimum level mark a
recommended brake fluid to the proper
level.
Recommended brake fluid:
DOT4
WARNING
INSP
ADJ
Add the