Table 7-119. PIM Threshold Configuration Page Parameters (Continued)
Parameter
RP Threshold
RP Switching Period
Static RP
Clicking on the S
(Figure
7-146).
Description
Indicates the threshold value for the number of registered packets
received, which when exceeded, RP initiates switching to source specific
shortest path.
Indicates the time interval for which the registered packets are monitored
to initiate switching to SPT.
Figure 7-146. Static RP Configuration Page
RP tab opens the S
TATIC
Table 7-120
lists the parameters found on this page.
Chapter 7: 10-Gb Ethernet Switch Firmware
RP C
TATIC
ONFIGURATION
185
page