Super Micro Intelligent Switch Command Line Interface User Guide
22.13
rp-static rp-address
This command sets the address of the interface, which will be advertised as a Static-RP and the
no form of the command disables the address of the interface, which will be advertised as a
Static-RP.
rp-static rp-address <Group Address> <Group Mask> <IP address>
no rp-static rp-address <Group Address> <Group Mask>
Syntax Description
Group Address - Indicates the PIM Sparse multicast group address using the listed RP.
Group Mask - The IP multicast group address mask that gives the group prefix for which this
entry contains information about the RP
IP address - IP address
Mode
PIM Component Mode
Example
SMIS(pim-comp)# rp-static rp-address 224.1.0.0 255.255.0.0 20.0.0.2
Static configuration allows additional structuring of the multicast traffic by directing the
multicast join/prune messages to statically configured RPs.
Related Commands
show ip pim rp-static – Displays the RP-static information
Release : 1.1f
547 / 985