Led And Button Operation; Led; Button Operation - Wasp WPL205 User Manual

8. LED and Button Operation

8.1 LED

LED Color
Green/ Solid
Green/ Flash
Amber
Red / Solid
Red / Flash

8.2 Button Operation

Feed
Pause
Gap/Black Mark Sensor
Calibration
This illuminates that the power is on and the device is ready to
use.
This illuminates that the system is downloading data from PC to
memory and the printer is paused.
This illuminates that the system is clearing data from printer.
This illuminates printer head open, cutter error.
This illuminates a printing error, such as paper empty, paper jam,
or memory error etc.
Press the button when the LED is green.
It feeds the label to the beginning of the next label.
Press the feed button during printing.
The printing job is suspended.
1.Turn off the power switch.
2. Hold on the button then turn on the power switch.
3 Release the button when LED becomes red and blinking. (Any red will do
during the 5 blinks).
It will calibrate the gap/black mark sensor sensitivity.
The LED color will be changed as following order：
Amber red (5 blinks)
green/amber (5 blinks)
It calibrates the sensor and measures the label length.
Note:
Please select gap or black mark sensor by GAP or BLINE command
prior to calibrate the sensor.
For more information about GAP and BLINE command, please refer to
WPL programming manual.
22
Description
amber (5 blinks)
red/amber (5 blinks)
green (5 blinks)
solid green