3.4 Loading Label for Peel-off Mode (Option)
1. Open the peel-off module by pulling it out.
Peel-off Roller
Peel-off Panel
2. Thread the label, printing side facing up, through the label guides and place it on top of the
platen.
3. Thread the label through the liner opening, which is beneath the roller.
4. Adjust the black center-biased label guides by turning adjustment knob to fit the edge of
the label backing.
5. Push the peel-off panel back to the printer.
6. Close the top cover.
9
Adjustment Knob
Roller
Peel-off panel