Maintenance; Cleaning - Wasp WPL205 User Manual

5. Maintenance

5.1 Cleaning

Use one or more of the following supplies:
Cotton swab
Lint-free cloth
Vacuum
100% ethanol
The cleaning process is described below:
Printer Part
Printer Head
Platen Roller
Exterior
Interior
Note:
Do not touch printer head by hand. If you touch it, please use ethanol to clean it.
Please use industrial alcohol. Regular alcohol may damage the printer head.
You may have to clean the supply sensors more often if you frequently receive supply
error messages.
1. Always turn off the printer before cleaning the print head.
2. Allow the printhead to cool for a minimum of one minute.
3. Use a cotton swab and 100% ethanol to clean the print head
surface.
1. Turn the power off.
2. Rotate the platen roller and wipe it thoroughly with 100%
ethanol and a cotton swab or lint-free cloth.
Wipe it with water-dampened cloth.
Brush or air blow.
17
Method