Troubleshooting; Led Status - Wasp WPL205 User Manual

6. Troubleshooting

This section lists the common problems that you may encounter when operating the printer.

6.1 LED Status

LED Status / Color
Off
Solid Green
Flash Green
Flash Red
1. No power.
Turn on the power switch.
Check if the green LED is lit on power supply. If it is not lit on, power supply is
broken.
Check both power connection from the power cord to the power supply and from
the power supply to the printer power jack.
2. The printer is on and ready to use.
No action necessary.
3. The printer is paused.
Press the feed button to resume printing.
4. The printer is out of labels or the printer setting is not correct
Out of labels
Load a roll of label and follow the instructions in "Loading the Paper",
then press the feed button to resume printing.
Printer setting is not correct
Initialize the printer by following the instructions in "Power on Utility".
Printer Status
off
on
Paused
Stopped
18
Solution Number
1
2
3
4