Telephone Functions; Putting A Call From Cordless Telephone; Calling Additional Telephone Functions; Getting Outside Line - Sagem Phonefax 40 User Manual

1 Telephone functions

For information on how to connect additional cordless tel-
ephones and another device and which functions are avail-
able to you, please refer the chapter on Telephone Connec-
tions and additional devices, Page 35.
Putting a call from cordless tele-
phone
Dialling a number
Dial the desired number. There are several ways to do this:
Then press ".
Direct dialling
You can also press " first and then dial a number.
The dialling process begins immediately.
Forwarding fax to the device
If you receive a call on the cordless telephone and
hear that it is a fax call (whistling tone or silence), you
can start the fax reception on the device. Press either
o on the device or *5 on the cordless telephone.
Manual dialling: Dial the desired number using the nu-
meric keypad.
Telephone Book of the Cordless Telephone:
1 Hold m pressed (for at least two seconds).
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
If you have added an additional number to an en-
try, this entry appears twice in the telephone
book. The symbol of the category appears before
the name.
Telephone Book of the Device:
1 Press m.
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
Redial list: Press and hold @ (at least two seconds). Use
[ to select an entry from the list of the dialled numbers.
Caller List:
1 Press [, and using [ CALLS select PERSON-
ALIS. .
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
Adjusting volume level
You can adjust the volume level of the speaker on the
cordless telephone using [ even during a call.
Looking up Numbers
Looking up Numbers
During a call, you can look up the telephone book entries.
1 During a call, press ô Menu .
2 Use [ to select PHONEBOOK .
3 Using [, dial the desired entry.
Previous menu
Press õ Return to return to the previous menu lev-
el.
Telephone functions
Calling additional telephone func-
tions
(Function is not supported in all countries and Function is not supported in all countries and networks
networks)
Additional telephone functions
You can use additional telephone functions with your de-
vice for example call on hold, three-way call or forwarding.
Contact your telephone company to inquire whether or
not these functions are available for your connection. The
signal to the switchboard to call these services is a short line
interruption (Hook Flash). Press the R key to call the ad-
ditional telephone functions.
Receiving a second call
During a call, press ô ACCEPT to accept the new call.
Switching between calls (= hold)
2: Call waiting
Hot key: Press R, to toggle between the calls.
1 During a call, press ô Menu .
2 Using [ select SWITCH .
3 Confirm with OK.
Making a second call
Dialling another number
Hot key: Pressõ, and dial the other number.
1 During a call, press ô Menu .
2 Dial using [ SECOND CALL .
3 Enter the desired number using the numeric keypad.
4 Press ô Call .
1: Ending a call
Hot key: Press õ and 1, to end the call and to ac-
tivate the call on hold.

Getting outside line

PABX Systems
Private branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
Enter the outside line access code with which you reach the
public telephone network before you enter the desired
number or select a stored entry. The outside line access
code is usually 0.
Outside Line Access Code Error
In rare cases, the outside line access code may be a
different number or a two-digit number. For older
telephone systems, the outside line access code can be
R (= Flash). Press R to enter this outside line access
code. If the connexion to the public telephone net-
work is not possible, contact your telephone system
supplier.
Setting up an extension
If you operate your device permanently at an exten-
sion, store the outside line access code with the 96
function (see page 35).
EN
13