Table of Contents
Advertisement
Hands-free
Low battery charge
This function is not available if the battery charge of
the cordless telephone is low. Place the cordless tele-
phone into the charging station.
Switching on hands-free
EN
1 During a call, press ô Menu .
2 Using [ select Deact. .
3 Confirm with OK.
Switching off hands-free
1 Select Deact. again.
2 Press ô Deact. .
Switching hands-free on/off
You can switch the hands-free mode on and off by
pressing " button during a telephone call.
Forwarding a call
Existence of several devices is the prerequisite
Forwarding a call to Dect
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
1 During a call, press ô Menu .
2 Using [ select CALL TRANSFER .
3 Confirm using OK.
4 Select the cordless telephone to which you would like
to transfer the call using [.
5 Confirm using OK.
6 Press ', to hang up.
Getting back the telephone call
You can get a transmitted telephone call back, before the
cordless telephone is picked up.
1 Press ô Menu .
2 Using [ select HANGING UP .
3 Confirm using OK.
Placing internal calls
Intercom Dect
Existence of several devices is the prerequisite
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
1 In the starting mode, press {.
2 Using [ dial the cordless telephone you would like to call.
3 Press ô Call .
Calling Line Identification (CLIP)
(Function is not supported in all countries and
Function is not supported in all countries and networks
networks)
CLIP Definition
The number of an incoming call appears on the display.
For this function to work, the Calling Line Identification
Presentation (CLIP) must be activated for your telephone
connection. Enquire with your telephone company. Caller
Line Identification may be associated with a fee.
Setting the Country
If the Caller Line Identification does not work even
though the function is activated for your telephone
connection, check if you have set the correct country
(also see Chapter Settings, page 30).
14
Missed Calls
Displaying Telephone Book Names
Your machine displays the name with which you
have saved the number in the telephone book. The
number and name will not be shown if the caller sup-
presses his number.
Missed calls on Dect
If you receive calls in your absence, a message appears on
the display of the cordless telephone.
1 Press OK.
2 Using [, you can page through the list of missed calls.
3 Press ", to go back.
Sagem SPFX 40 · 45
Advertisement
Table of Contents
