Telephone Functions; Putting A Call From Cordless Telephone; Other Telephone Calls; Hands-Free - Sagem PHONEFAX 45DS User Manual

1 Telephone func-
tions
For information on how to connect additional cordless tel-
ephones and another device and which functions are avail-
able to you, please refer the chapter on Telephone Connec-
tions and additional devices, Page 35.
Putting a call from cordless tele-
phone
Dial the desired number. There are several ways to do this:
Dialling a number
Then press ".
Direct dialling
You can also press " first and then dial a number.
The dialling process begins immediately.
Forwarding fax to the device
If you receive a call on the cordless telephone and
hear that it is a fax call (whistling tone or silence), you
can start the fax reception on the device. Press either
o on the device or *5 on the cordless telephone.
Manual dialling: Dial the desired number using the nu-
meric keypad.
Telephone book of the cordless telephone:
1 Long press m (at least two seconds).
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
If you have added an additional number to an en-
try, this entry appears twice in the telephone
book. The symbol of the category appears before
the name.
Telephone book of the device
1 Press m.
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
Redial list Press and hold @ (at least two seconds). Us-
ing [ dial an entry from the list of the dialled numbers.
Caller List:
1 Press [, and using [ select CALLS .
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
Adjusting volume level
You can adjust the volume level of the speaker on the
cordless telephone using [ even during a call.
Looking up numbers
Looking up numbers
During a call, you can look up the telephone book entries.
1 During a call, press ô Menu .
2 Dial using [ PHONEBOOK .
3 Using [, dial the desired entry.
Previous menu
Press õ Return to go back to the previous menu
level.
12

Other telephone calls

Not supported everywhere
(Function is not supported in all countries and
networks)
Call Waiting
During a call, you can be informed about another call by a
notification tone (= call waiting) Contact your telephone
company to inquire about whether or not this additional
function is available for your line.
CLIP Prerequisite
For this function to work, the caller line identifica-
tion (CLIP) must be activated for your telephone
connection (country and network dependent). The
number and name will not be shown if the caller sup-
presses his number.
Receiving a second call
During a call, press ô ACCEPT to accept the new call.
Switching between calls (= hold)
2: Call waiting
Hot key: Press R, to toggle between the calls.
1 During a call, press ô Menu .
2 Using [ select SWITCH .
3 Confirm with OK.
Making a second call
Dialling another number
Hot key: Pressõ, and dial the other number.
1 During a call, press ô Menu .
2 Dial using [ SECOND CALL .
3 Enter the desired number using the numeric keypad.
4 Press ô Call .
1: Ending a call
Hot key: Press õ and 1, to end the call and to ac-
tivate the call on hold.

Hands-free

Low battery charge
This function is not available if the battery charge of
the cordless telephone is low. Place the cordless tele-
phone into the charging station.
Switching on hands-free
1 During a call, press ô Menu .
2 Using [ select Deact. .
3 Confirm with OK.
Switching off hands-free
1 Select Deact. again.
2 Press ô Deact. .
Switching hands-free on/off
You can switch the hands-free mode on and off by
pressing " button during a telephone call.