Symbol PDT 3100 Series Product Reference Manual page 77

Starting Communications
1. The terminal is ready to send the data to the host PC and displays:
2. Verify that the host is ready to receive data.
3. Press <Enter> on the terminal.
While data is being transferred, the terminal displays a report of the 1 KB range
being transferred:
The display is updated for every 1024 bytes (1 KB) of memory.
4. When the transmission completes or aborts, the terminal displays the transmission
status screen:
A status of 0000 (all zeros) indicates that the transfer was successful. Any other status
indicates failure. Refer to Appendix C for communications status codes which indicate the
source of the error.
Ending Communications
To return to the Command Mode main menu, press <Clear>. Then take the necessary
corrective action and reboot the terminal.
Comm Parameters
Start? <ENT>
Memory Transfer
Sending: XXXX
Memory Transfer
Status 0000
Error Recovery and Troubleshooting
5-15