Replacing Nimh Batteries - Symbol PDT 3100 Series Product Reference Manual

To replace a NiMH battery with a 9V alkaline battery:
1. Perform steps 1-3 of
2. Remove the NiMH battery and battery connector.
3. Plug the 9V connector in the 9V socket (refer to
4. Perform steps 5-6 of

Replacing NiMH Batteries

To replace an alkaline battery with a rechargeable NiMH battery pack, or to replace a NiMH
battery pack:
1. Power the terminal off.
2. Release the handstrap.
3. Unlock and remove the battery compartment door.
4. If the previous battery was an alkaline, gently remove the 9V connector from the
9V socket. Do NOT tug on connector wires. Store the connector.
5. Plug the battery connector in the rechargeable battery socket immediately below
the 9V socket (refer to
6. Fit the NiMH battery pack in the compartment next to the adapter.
7. Verify that the battery and connector are properly seated.
Connector
8. Replace and lock the battery compartment cover.
9. Reattach the handstrap.
Replacing Alkaline
Replacing Alkaline
Figure 6-2).
NiMH Battery
Battery
Battery
Sockets
Figure 6-2. PDT 3100 Battery Replacement
Batteries.
Figure
Batteries.
Hold Plugs
Handstrap
Connector
Maintaining the PDT 3100
6-2).
Handstrap
Battery
Compartment
Latch
Battery
Compartment
Door
6-7