Error Messages; Pdt 3100 - Symbol PDT 3100 Series Product Reference Manual

PDT 3100 Series Product Reference Guide

Error Messages

PDT 3100

If ERR3000 is loaded in the system configuration, the terminal displays the following
messages to indicate error conditions that affect system performance. A message is
usually accompanied by one or more beeps, after which the system returns to its previous
status.
The application can change the wording of the messages or disable messages. The
messages listed in Table
for further information.
Message
Double Key Error
Low Battery
Replace Battery
Power Fault
5-4
5-1are representative. Refer to the application's documentation
Table 5-1. Error Messages
Two or more keys were pressed at the same time. This does not include
boot sequences (refer to
sequences).
Replace or recharge the battery pack as soon as possible.
Replace or recharge the battery pack immediately. After this message is
displayed, the system shuts off. You may not be able to power it on again
until the battery pack is charged.
The last power off was caused by a power failure. This occurs, for
example, if the battery pack is removed while the terminal is on or the
batteries fail suddenly.
Explanation
Chapter 4, Operating the PDT 3100, for boot