Symbol PDT 3100 Series Product Reference Manual page 115

Communications Status Codes
The program loader status code consists of four hexadecimal digits which indicate whether
or not the transfer was successful, and if not, the source of the communications error. A
status code of 0000 indicates success; any other code indicates failure.
Table C-1 lists the failures associated with the status codes. The values are additive.
Appendix C
Table C-1. Communications Status Codes
Status Code
0002 Receive overrun error
0004 Receive parity error
0008 Receive framing error
0010 Programming voltage not present
0020 Data Set Ready or Carrier Detect not
detected on open
0080 ABORT key hit during comm
0100 Insufficient NVM for image
0200 Illegal Intel hexadecimal record
0400 Unsupported Intel record
0600 NVM EEPROM failed to erase
0800 Receive time-out error
1000 Control start character time-out
2000 Clear To Send inactive time-out error
4000 Receive buffer full
Meaning
C-1