Symbol PDT 3100 Series Product Reference Manual page 40

PDT 3100 Series Product Reference Guide
Successful Association, Download Fails
The download may fail for one of the following reasons:
Terminal Cannot Find BOOTP Server. If the terminal cannot find the BOOTP or DHCP
Server for download, it displays the message:
and returns to the DOS prompt. Contact the Symbol Support Center for assistance.
File Transfer Fails. If the file transfer fails, the terminal displays the message:
where <filename> is the file that was not fully downloaded. The terminal may be out of
range of the AP and cannot find the files to transfer.
Press <Ctrl+C> to exit and request help from the Symbol Support Center, or press a key
to retry the file transfer.
If the file transfer retry is successful, the terminal displays messages indicating success and
the application logon screen. Begin operating the terminal application. If not, contact the
Symbol Support Center for assistance.
3-10
Cannot find Boot Server, time out
You have no boot server or it has problems
TFTP retry counter exceeded, Receive timeout.
Error <filename>
Ctrl-C to end or other key to retry.