Language Setting - Sungrow SG3KTL-M User Manual

User Manual
10.7

Language Setting

Input the correct password of 1111 to set the inverters' parameters.
There are system parameters, running parameters, protective parameters and
communication parameters to be set.
Inverter supports four different languages: English, German, French and Italian.
Language can be configured as follows.
P(%)
P-ac
100
80
E-day
60
E-tot
40
20
t
State
0
8 14 20
Language
Time
Energy-adj
Load default
Firmware Version
1. Long press "ENTER/►" to enter into the
general control screen.
4.000 kW
15.6 kWh
4976 kWh
Run
2009/11/18 18:35
2. Short press "ESC/ "
arrow-pointer to "Set-param".
3. Long press "ENTER/►" to enter into its
sub-screen.
4. Short press "ENTER/►" to move right and
short press "ESC/ "
1111.
5. Long press "ENTER/►" to confirm the
command.
6. Short press "ESC/ "
arrow-pointer to "Sys-param".
7. Long press "ENTER/►" to enter into its
sub-screen.
8. Short press "ESC/ "
arrow-pointer to "Language".
9. Long press "ENTER/►" to enter into its
sub-screen.
10. Short press "ESC/ "
select the number that represents language.
11. Long press "ENTER/►" to confirm the
selection.
10 Operation of LCD Menu
▼
to navigate the
▼ to set the correct password
▼
to navigate the
▼
to navigate the
▼ to navigate the cursor to
67