Mass Storage Devices (Drives) - HP Proliant ML150 G6 Maintenance And Service Manual

Mass storage devices (drives)

The server supports a maximum of 11 mass storage devices. The top-most drive bay (bay 11) is
populated with an optical drive in the standard configuration. The next lower drive bay (bay 10) can
accommodate an additional optical drive, and bay 9 can accommodate a tape drive. The upper hard
drive area supports a non-hot-plug or hot-plug hard disk drive (HDD) cage providing bays 1 through
4.
Servers shipped with a hot-plug HDD cage in the upper drive bay area can support an additional hot-
plug HDD cage in the lower drive bay area providing bays 5 through 8. Servers shipped with a non-
hot-plug HDD cage in the upper bay area can be upgraded to a hot-plug HDD system by replacing
the non-hot-plug HDD cage with an optional hot-plug HDD cage. The server supports SATA or SAS
drives.
Figure 3-6 Drive bay configuration
1
2
Item Description
1 1 st optical drive (bay 11)
2 2 optical drive (bay 10)
nd
3 Tape drive or 3
4 Upper hard drive area, bays 1 (left) through 4 (right)
5 Lower hard drive area, bays 5 (left) through 8 (right)
All manuals and user guides at all-guides.com
rd optical drive bay (bay 9)
Removal and replacement procedures 33