Filter Operation - Nikon Eclipse LV100POL Instructions Manual

3

Filter Operation

For the diascopic illumination
Two filters are installed in the base of the microscope.
And filter selector switches for the filters are located at the right side of the microscope. To locate
the filter into the optical path, push the lower side of the switch. To remove the filter from the
optical path, push the upper side of the switch.
NCB11
(ND filter)
ND8
For the episcopic illumination
Two filter sliders are located near the rear side of the epi illuminator. Each slider can holds two
filters. Push in or pull out the filter slider to locate the filters. To attach filters to the filter slider, see
Page 50.
NCB11
ND4 (ND filter)
ND16 (ND filter)
(green interference filter)
GIF
IF (interference filter)
24
Filter type
(color balancing filter)
Filter type
(color balancing filter)
Intended use
For color balance adjustment and color photomicrography
For brightness adjustment (transmittance 12.5%)
Intended use
For color balance adjustment and color photomicrography
For brightness adjustment (transmittance 25%)
For brightness adjustment (transmittance 6%)
For contrast adjustment
For interference