Table of Contents
Advertisement
Pull out the polarizer slider on the epi
5
illuminator to remove the polarizer from
the optical path.
See Page 36.
Push in the analyzer slider on the
6
polarizing intermediate tube to remove the
analyzer from the optical path.
See Page 37.
Move the Bertrand lens turret to the "0"
7
position to remove the Bertrand lens from
the optical path.
See Page 39.
Push in the illumination selector lever on
8
the epi illuminator to set the bright-field
(BF) position for it.
See Page 42.
Rotate the nosepiece to place the 10x
9
objective into the optical path.
Set the specimen in place with the cover
10
glass facing up.
Fully open the field diaphragm and the
11
aperture diaphragm on the epi illuminator.
See Pages 43 and 44.
When using the trinocular eyepiece tube,
12
set the optical path selector lever to the
position where 100% light goes through
the binocular eyepiece.
See Page 27.
Adjust the diopters and the interpupillary
13
distance.
See Page 28.
Focus on the specimen.
14
Fully loosen the coarse focus stopper ring.
See Page 25.
Center the objective.
15
See Page 33.
Center the field diaphragm.
16
See Page 43.
0
Move the
7
Bertrand
lens to the
"0" position.
Set to the "BF"
8
(bright-field)
position.
Ach r
0. 8
0.6
0.90
JAPAN
0.4
0.2
Set the 10x
9
objective.
Cover glass
0
facing up
Set the
10
specimen.
Adjust the diopters.
13
0
Adjust the interpupillary distance.
13
0
BF
D F
Center the
15
objective.
Ach r
0. 8
0.90
0.6
JAPAN
0.4
0.2
F.S.
II. Microscopy
Remove the analyzer
6
from the optical path.
P
A. ST O
P
F. ST O
BF
D F
Remove the
5
polarizer from
the optical path.
Fully open the field
11
NCB
diaphragm and the
ND8
aperture diaphragm.
F.S.
A. ST O
P
F. ST O
P
BF
D F
Set to the BINO position.
12
P
A. ST O
P
F. ST O
P
A. ST O
P
F. ST O
Center the
16
field
diaphragm
(both sides).
NCB
ND8
Loosen the coarse focus
14
stopper ring and focus on
the specimen.
19
Hide quick links:
Advertisement
Table of Contents
