Operation Of The Analyzer - Nikon Eclipse LV100POL Instructions Manual

18

Operation of the Analyzer

Attach/detach the analyzer
The polarizing intermediate tube has the analyzer
slider. The analyzer can be placed into the optical
path with the operation of the slider.
To place the analyzer into the optical path, pull
out the slider. To remove the analyzer from the
optical path, push in the slider.
The analyzer is designed to be inserted from the
right side of the polarizing intermediate tube in
normal use, but it can be inserted from the left. In
the later case, its scale displays the opposite way.
Be careful.
Rotate the analyzer
The analyzer slider has a rotating dial. The
orientation of the analyzer can be rotated with it.
To adjust the analyzer, loosen the analyzer
rotation clamp screw and rotate the rotating dial.
The angle of rotation can be read from 0 to 180
degrees in steps of 0.1 degrees with the two
vernier scales.
The intermediate tube also has a de-polarizer. You can use the photomicrography device or
so on independently of the orientation of the polarizer.
III. Operation of Each Part
Analyzer
slider
0
Analyzer
rotating dial
Vernier
10 0
Analyzer rotation
clamp screw
37