Troubleshooting Hints - Konica Minolta 1216 User Manual

Troubleshooting

Troubleshooting Hints

COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON
Press any control panel key to disable Auto Shut Off.
Fully insert paper tray(s), otherwise light will remain amber.
START PRINT
Check to be sure the plug is firmly inserted in electrical socket.
COPY IMAGE IS TOO LIGHT
Manually adjust copy density to darker density.
Check the ADD TONER indicator, and add toner, if required.
Check paper for dampness. Paper should not be left in the copier for
an extended period of time in a high humidity environment.
COPY IMAGE IS TOO DARK
Manually adjust copy density to lighter density.
COPY IMAGE IS NOT CLEAN OR SHOWS SPOTS
Use clean originals since dirt marks may be copied.
Keep platen glass and document cover inner surface clean.
Check to see if the CALL FOR PM indicator light is lit or flashing.
Check density indicator and lighten density if required.
COPY PAPER MISHANDLES DURING COPYING
Fan copy paper and load it curl side up. Paper stack should not exceed
the tray capacity.
COPY IMAGE CAN BE RUBBED OFF
Check copy paper thickness.
MAGNIFICATION CANNOT BE CHANGED
Press to reset copier.
AUTO
Shift, Reduce & Shift and Book Copy cannot be selected.
WHITE LINES APPEAR ON COPY IMAGE
Clean the corona wire using the wire cleaning knob.
Troubleshooting 9-17