Konica Minolta 1216 User Manual page 105

Glossary
FIXING UNIT an internal copier component that fuses toner to paper with
heat and pressure.
FOLD ERASURE the erasure of copy marks down the center of an
opened book or 11"x17" sheet of paper.
FRAME ERASURE the erasure of copy marks along borders of an
opened book or 11"x17" sheet of paper.
GROUP MODE a sorter mode used to convey multiple copies of each
original to separate bins of the sorter.
IMAGE SHIFT see SHIFT.
INITIAL MACHINE SETTINGS the machine condition when copier power
is turned on and the machine is in the ready-to-copy state.
J CODES codes that indicate the type and location of user-clearable
mishandled paper.
JOB a copying operation that is performed after pressing .
START PRINT
KEYPAD a section of the control panel used to enter print quantity
amounts and special settings, select programming functions, clear
settings, and stop copying in progress.
LENS MODE a mode which sets the lens to Preset or Zoom mode.
MACHINE CODES user code or service code indications regarding
machine or copying status.
MAGNIFICATION a ratio relationship between original image and copy
paper size.
MANUAL DENSITY a manual toner density adjustment.
MANUAL DUPLEX manual two-sided copying, performed using the bypass.
MEASURING GUIDE the ruled guide plate along the left edge of the
platen glass used for determining the correct placement of originals.
G-4 Glossary