Konica Minolta 1216 User Manual page 111

Specifications
Name
Configuration
Platen
Development
Photoreceptor
Toner
Waste Toner
Auto Shutoff
Auto Reset
Warm Up
Operating Environment
First Copy Out Time
Continuous Copy
Copying Speed
Platen Original
Copy Paper
Copy Paper Sources
Copy Density
S-2 Specifications
Konica 1216
Desktop
Stationary
Dry 2-component magnetic brush
OPC drum
Black
Toner recycling system
30/60/90/120 minutes, set by service (default setting is 30 min.)
None or 2 minutes, set by service
Approximately 65 seconds at 68°F (20°C) with 50% RH
50°~91°F (10°~33°C); 10~80% RH recommended
5.5 seconds, 8.5"x11" Manual/AES
1~99
16cpm: 8.5"x11"; 8.5"x11"R
15cpm: 8.5"x14"; 12cpm: 11"x17"
Sheet/Book; 11"x17" (280mm x 432mm) maximum
Book Weight: 15 lbs (6.8kg)
Book Thickness: 1.6" (40mm)
Registration: Center line
Leading edge: Left side
Size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"
Weight: 16~24 lb bond with tray;
In bypass: 16~32 lb plain paper and special stock:
OHP film, labels, 3-hole punch, rag content
(feed special stock one sheet at a time)
2 tray ports (250 sheets; service-adjustable)
Bypass: 50-sheet (16~24 lb);
user-adjustable, 11"x17"~5.5"x8.5"
Optional tray: 250 sheets (20 lb bond)
Drawer Base (DB-207A): 1 x 250 sheets; (20 lb bond)
Drawer Base (DB-607):
Paper: As recommended by Konica
APS Automatic Paper Selection (scanning)
AES Automatic Exposure Selection
Automatic (AES), plus manual density (7 levels)
Specifications Subject To Change Without Notice
1 x 250 sheets; (20 lb bond)
1 x 1,000 sheets; (20 lb bond)
1 x 250 sheets; (20 lb bond)