Konica Minolta 1216 User Manual page 108

Glossary
RECALL KEY [0] a key that can be pressed while copying is in progress
to display the print quantity selected for the job.
REDUCE & SHIFT a mode that preforms an automatic image reduction
with Image Shift, when the binding margin (Shift) alone is likely to cause
image loss.
SERVICE CODES F Codes which indicate machine conditions requiring
the attention of a Konica service representative.
SHIFT a mode that allows the user to create a fixed binding margin on the
copy.
SIMPLEX one-sided.
SITE REQUIREMENTS the recommended space requirement for the
copier and its installed accessories.
SORT a sorter mode that collates a full set of originals in separate bins.
SORTER a copier accessory which automatically sorts (collates) and
groups copies.
SPECIAL RATIO TABLE a ratio table used to determine the appropriate
magnification when using non-standard original and copy combinations.
SPECIAL STOCK copy material that cannot be fed through the regular
paper feed unit due to its weight, size or texture, e.g., OHP
transparencies, label sheets, card stock, heavy stock, etc.
SPECIFICATIONS specific information pertinent to the description and
function of the copier.
STAND the base unit which supports the copier.
STAPLE CARTRIDGE a replaceable container for staples.
STAPLER an off-line or in-bin device that inserts a wire cinch (staple) on
the top corner or side of copied sheets.
Glossary G-7