Konica Minolta 1216 User Manual page 29

Copier Information
Control Panel (continued)
23 24
ZOOM
PRESET
LENS MODE
25 26
18 AUTO COPY automatically activates copying each time the Document Feeder
is closed.
19 COPY DENSITY INDICATORS light the density level selected.
20 COPY DENSITY manually overrides AES in seven levels, from normal to
lighter or darker.
21 USER PRESET INDICATOR lights when the user set lens mode is selected.
22 MAGNIFICATION [ ]/[ ] arrows increase or decrease the current ratio.
23 ZOOM INDICATOR lights when the Zoom mode is selected.
24 RATIO WINDOW displays the magnification ratio in use and machine codes.
25 PRESET INDICATOR lights when the Preset mode is selected.
26 LENS MODE selects Preset or Zoom modes for manual ratio selection.
27 COPY SIZE INDICATORS light to indicate the copy size selected.
28 COPY SIZE overrides APS for manual copy size selection.
29 AUTO INDICATORS light when the AUTO button is pressed to indicate APS,
AES, ADF and SORTER are activated; go out when copy conditions are set
manually.
30 AUTO restores the initial machine settings and clears copy selections.
31 KEYPAD is used to enter print quantity and Frame/Fold Erasure values.
32 [P] KEY is sued to access all programming functions.
33 [O] RECALL recalls print quantity selected while copying is in progress.
34 STOP/CLEAR stops continuous copying and allows reset of print quantity.
35 PRINT QUANTITY WINDOW displays print quantity when selected and
cumulative quantity while copying is in progress.
36 POWER SAVER activates an energy saving mode when the copier will not be
used for an extended period of time.
37 START PRINT indicates wait when light is amber and ready when light is blue-
green; activates copying when pressed while copier is in the ready-to-copy
state.
27 29
11 17
1
8 14
2
1
8 11
2
1
8 11R
2
1 1
5 8
2 2
SPECIAL
COPY SIZE AUTO
28 30
31
PRINT QUANTITY
1 2 3
4 5 6
7 8 9
P 0
RECALL STOP/CLEAR START PRINT
32 33 34
35 36
POWER SAVER
37
Copier Information 3-7