Konica Minolta 1216 User Manual page 100

Troubleshooting
Troubleshooting Hints (continued)
COPYING DOES NOT BEGIN AFTER START PRINT IS PRESSED
Insert or adjust the appropriate paper tray for copy size selected.
Close document cover firmly.
Close front door completely.
COPY QUALITY IS POOR
Check paper for dampness, and replace if necessary.
THE ORIGINAL PAPER IS MISHANDLED IN THE ADF
Originals should conform to recommended size and weight.
Be sure there are no staples in the originals.
Align originals evenly in the ADF.
COPY IMAGE IS SKEWED WHEN BYPASS IS USED
Be sure copy paper is inserted straight.
COPIES CANNOT BE MADE AFTER REMOVING MISHANDLED PAPER
Remove mishandled paper from all positions indicated on the control
panel diagram by a flashing light.
SORTER DOES NOT OPERATE
Press button.
SORTER
Remove paper misfeed, if any.
Properly close sorter cover.
ADF INDICATOR WILL NOT LIGHT AFTER AUTO/RESET IS PRESSED
Close ADF fully.
CHECK PAPER PATH LIGHT IS FLASHING ON CONTROL PANEL
Remove any mishandled paper or wedged staple.
ADD PAPER INDICATOR LIGHT IS FLASHING
Check paper supply in the paper tray(s).
9-18 Troubleshooting