Programming A User Preset Ratio - Konica Minolta 1216 User Manual

Basic Copying
Lens Modes (continued)

Programming a User Preset Ratio

For convenience, program a frequently-used ratio that is not available
as a factory preset ratio. This ratio can be set and changed by the user
as needed.
USER PRESET RATIO: Programmable from 0.50~2.00 in 1% increments
P
LENS MODE
ZOOM
PRESET
USER PRESET
MAGNIFICATION LENS MODE
NOTE: The User Preset ratio will remain stored until it is overwritten.
1 While pressing
USER PRESET
2 Use the Keypad to enter a
1 2 3
3 If necessary, press
4 5 6
7 8 9
P 0 4 Press
RECALL STOP/CLEAR
. The User Preset
MODE
indicator light will flash.
three-digit ratio (0.50~2.00).
to restore the original
CLEAR
ratio or to clear a mis-entry.
to store the new ratio.
[P]
, press
[P] LENS
STOP/
Basic Copying 5-9