Programming A User Preset Ratio - Konica Minolta Copier 2223 User Manual

Basic Copying
Lens Modes (continued)

Programming a User Preset Ratio

For convenience, program a frequently-used ratio that is not available
as a factory preset ratio. This ratio can be set and changed by the user
as needed.
USER PRESET RATIO: Programmable from 0.50~2.00 in 1% increments
NOTE: The User Preset ratio will remain stored until it is overwritten.
1 While pressing
. The User Preset
MODE
indicator light will flash.
2 Use the Keypad to enter a
three-digit ratio (0.50~2.00).
3 If necessary, press
to restore the original
CLEAR
ratio or to clear a mis-entry.
4 Press to store the new ratio.
[P]
, press
[P] LENS
STOP/
Basic Copying 5-11