Adjusting The Shift Pedal; Checking The Final Drive Oil Level - Yamaha BT1100 2002 Service Manual

a
2
c
1
b
2

ADJUSTING THE SHIFT PEDAL/

CHECKING THE FINAL DRIVE OIL LEVEL

EASB0009
ADJUSTING THE SHIFT PEDAL
1. Check:
2. Adjust:
a. Loosen both locknuts 1.
b. Turn the shift rod 2 in direction b or c to
1
Direction b
Direction c
EAS00144
CHECKING THE FINAL DRIVE OIL LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
• Place the motorcycle on a suitable stand.
1
• Make sure that the motorcycle is upright.
2. Remove:
3. Check:
3-26
INSP
• shift pedal position (distance a from the top
of the rider footrest to the top of the shift
pedal)
Out of specification Adjust.
Shift pedal position
(below the top of the rider footrest)
45 mm
• shift pedal position
obtain the correct shift pedal position.
Shift pedal is raised.
Shift pedal is lowered.
• final drive housing oil filler bolt 1
• final drive oil level
The final drive oil level should be to the bot-
tom brim 2 of the filler hole.
Below the bottom brim
mended final drive oil to the proper level.
ADJ
Add the recom-