Removing The Middle Drive Shaft Assembly; Disassembling The Middle Drive Shaft Assembly - Yamaha BT1100 2002 Service Manual

MIDDLE GEAR
REMOVING THE MIDDLE DRIVE SHAFT
ASSEMBLY
1. Remove:
• bearing retainer
• middle drive shaft assembly
a. Straighten the thread on the bearing retainer.
b. Attach the bearing retainer wrench 1.
Bearing retainer wrench:
90890-04137
c. Remove the bearing retainer and middle drive
shaft assembly.
DISASSEMBLING THE MIDDLE DRIVE SHAFT
ASSEMBLY
1. Remove:
• spring retainers 1
NOTE:
While compressing the spring with a damper
spring compressor 2, remove the spring retain-
ers.
Damper spring compressor
90890-04090
2. Straighten the thread on the middle drive shaft
nut.
3. Remove:
• middle drive shaft nut 1
• bearing 2
• middle drive shaft 3
a. Attach the middle drive shaft holder 4 onto
the middle drive shaft as shown.
Middle drive shaft holder
90890-04055
b. Secure the middle drive shaft holder in a vice.
c. Loosen the middle drive shaft nut with the
middle drive shaft nut wrench 5.
Middle drive shaft nut wrench
90890-04138
d. Remove the middle drive shaft nut and bear-
ing.
4-75
ENG