Yamaha BT1100 2002 Service Manual page 317

ELECTRIC STARTING SYSTEM
5. Measure:
• brush length a
Out of specification
as a set.
Min. brush length
5 mm
6. Measure:
• brush spring force
Out of specification
springs as a set.
Bruch spring force
7.65
7. Check:
• gear teeth
Damage/wear
8. Check:
• oil seal
Damage/wear
part(-s).
EAS00772
Assembling the starter motor
1. Install:
• brush holder 1
NOTE:
Align the tab a on the brush holder with the slot
in the starter motor rear cover.
2. Install:
• starter motor yoke 1
• end bracket 2
• starter motor front cover 3
NOTE:
Align the projection a on the front cover with the
slot b on the end cover and starter motor yoke.
7-23
ELEC
Replace the brushes
Replace the brush
10.01 N (780 1.020 g)
Replace the gear.
Replace the defective