Yamaha BT1100 2002 Service Manual page 99

1
1
REPLACING THE HEADLIGHT BULB
CAUTION:
Avoid touching the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the life of the bulb
and the luminous flux will be adversely affect-
ed. If the headlight bulb gets soiled, thorough-
ly clean it with a cloth moistened with alcohol
or lacquer thinner.
7. Install:
• headlight bulb holder
8. Connect:
• headlight coupler
9. Install:
• headlight bulb cover
• cowling
NOTE:
Before installing the headlight, be sure to hook the
headlight and auxiliary light bulb leads into the guide
1 to the left of the headlight as shown.
Auxiliary light
1. Remove:
• cowling screws 1
(tilt the cowling forward)
1
2. Remove:
• auxiliary light bulb holder 2
• auxiliary light bulb 3
2
3. Install:
• auxiliary light bulb (into the bulb holder)
3
• auxiliary light bulb holder (into the headlight)
• cowling
NOTE:
Before installing the headlight, be sure to hook the
headlight and auxiliary light bulb leads into the guide
to the left of the headlight as shown.
3-45
INSP
ADJ