Yamaha BT1100 2002 Service Manual page 229

FRONT AND REAR BRAKES
EB702210
REMOVING THE FRONT BRAKE MASTER
CYLINDER
NOTE:
Before removing the front brake master cylinder,
drain the brake fluid from the entire brake sys-
tem.
1. Disconnect:
• brake switch leads 1
(from brake switch)
2. Remove:
• union bolt 2
• copper washers 3
• brake hose 4
NOTE:
To collect any remaining brake fluid, place a con-
tainer under the master cylinder and the end of
the brake hose.
EASB0022
REMOVING THE REAR BRAKE MASTER
CYLINDER
Before removing the rear brake master cylinder,
drain the brake fluid from the entire brake system.
1. Remove:
• side cover (right)
• master cylinder cover 1
• union bolt/brake switch 2
• copper washers 3
• brake hose 4
NOTE:
To collect any remaining brake fluid, place a con-
tainer under the master cylinder and the end of
the brake hose.
6-24
CHAS